ENZ Guiding nozzles
ENZ Guiding Nozzles
Our guiding nozzles were designed specifically for targeted cleaning of pipe inlets. They are used for searching for connections in ground lines and can thus prevent the need for cleaning via a house connection. The cleaning is done from the main channel to the house connection line. The guiding nozzles consist of two nozzles: Either from a vibration nozzle or an HRH nozzle and a channel rinse nozzle at the front of a hydraulic hose. The connection is entered by the channel rinse nozzle. The channel rinse nozzle is used to easily find branches using the asymmetrical bore holes. Hard deposits in trickle lines, PE, steel and concrete pipes can be removed using the vibration nozzle. There are currently two different types of guiding nozzles available. The primary difference is in the vibration. The 17.044AE-001 with vibration is based on a rotopuls vibration nozzle. The 17.040A-001 without vibration is based on a semi-radial rotating nozzle. Both guiding nozzles clean pipes with diameters from 70-150 mm using a working pressure up to 350 bar / 5070 psi.
17.044AE-001 with vibration
17.040A-001 without vibration
With the guiding nozzle, you have the option of dismantling the hose with the header nozzle and replacing it with a center peak. When you buy a guiding nozzle, you will receive the center peak along with other accessories.
Modified guiding nozzle with center peak
Are you interested in a guiding nozzle and already have a new rotopuls vibration nozzle 04.044AE? Great! Then expand your tool variety with our guiding set 95.001 and you will be all set to modify your nozzle into a guiding nozzle. Our guiding set 95.001 includes the hose with the header nozzle, a center peak as well as additional accessories for special applications.
Maintenance / Repair
As with all rotating nozzles, the nozzle inserts for the guiding nozzles must be inspected regularly. The wear and tear on the nozzle depends on the degree of contamination of the used water. Use a preservative spray to prevent corrosion build-up and regularly wash the guiding nozzle with clean water. This extends the service life.
Expansion of the Rotodrill™ nozzle selection: Reverse Rotodrill™ 36.025REV
Our Rotodrill™ nozzles are known for outstanding cutting power and their 3-4x better cleaning performance than standard nozzles with front jets. The fixed nozzle is equipped with an angled, rotating front jet, which cuts at a pointed angle to the pipe wall. Advancement is ensured by the back jet nozzles, which allows clogged pipes to be cleaned very efficiently. Even frozen pipes can be opened easily with the sharp front jet.
The Reverse Rotodrill™ 36.025REV adds yet another nozzle to the enz® product line, which can be used in all types of pipes. This nozzle is unique in that it works against the back with the cutting jet, thus in reverse of customary Rotodrill™ nozzles. It has much lower water consumption as a result
everse(Rotodrill)36.025REV
The Reverse Rotodrill™ should be used in dirty pipes from Ø 75 up to 150 mm and at up to 350 bar max. It is maintenance free and is suitable for use with recycled water.Click here to see the entire line-up of Rotodrill™ nozzles.